Hisencn Porcelain-Enameled Fire Burn Pot and Hot Rod Ignitor Kit Replacement Parts for Pit Boss and Traeger Pellet Grill with Screws and Fuse

Description

Brand: Hisencn

Features:

• Perfect Fits- Fits for Traeger and most Pit-boss pellet grills (NOT ALL Pit-boss). If our bonus screws can’t work on your grill, please use your old screws.
• Dimensions & Material- Black Enamel Fire burn pot: 5″ x 3 1/2″ x 3 3/4″, 7 Large air holes, 14 gauge steel wall. Total length of hot rod: 30″. hot stick: 3.7″. High-density cartridge heating element, 200W/120V wire lead, identical match to the OEM hot stick. Package: Includes 1 fire burn pot, 1 hot rod ignitor, 1 fuse, and 1 set of screws. Save your time to purchase screws from the hardware store.
• Easy installation- Plug and play wiring, took only about 10 minutes to replace. If you’re uncertain how to replace the rod, look it up on YouTube.
• Easy to clean ash- With porcelain coated, it is easy to clean the ash and the metal parts are fully covered with porcelain, providing effective protection from oxidation, YEARS longer than ordinary ones. Warning: A vacuum cleaner is the best way to remove ashes from the Firepot but this must be done with extreme care to avoid the risk of fire. Again, cleaning the ash from the Firepot should be done only when the Grill is COLD.
• Installation Tips- The burnt-out hot igniter rod may be difficult to remove sometimes, firstly, cutting off the end with a pair of diagonal pliers as swelling often occurs, then, taping a wire onto the electrical connector before remove, and the entire process will go smoother; And for Best Performance, Set the new Hot Rod to protrude 1/8 to 1/4 inch into the fire pot.